Is Your Roof Really Protected?
Be sure with the Grease Gutter™ -
Rooftop Grease Protection System



The Proof is in the Padding
To find out, take a few minutes to perform a “peek test” on your current rooftop protection system. The majority of Grease Gutter customers had competing products on their roofs and thought that their rooftop grease problems were solved. However, when they examined their protection systems a little more closely, they found out that these expensive systems were only hiding the problem, not protecting the roof as promised.

Don’t let a clean top layer of filter material fool you. An unscrupulous service provider might change only this layer to save himself the time, effort and expense required to do the job properly. A poorly maintained protection system will often cause more damage to a roof than if it was left unprotected.

A quick peek at the roof under the protection systems is often all that is needed to verify that you have been receiving the service and protection that you have paid for.

Uncontrolled roof top grease leads to:
• severe roof damage
• increased fire risk
• may lead to environmental violations

Until Grease Gutter™, rooftop grease control products were so difficult to service that proper maintenance was discouraged.

Grease Gutter Highlights
• one piece filter simplifies service
• mounts off roof to avoid hidden damage
• compact design doesn’t interfere with service providers
• economical to purchase and maintain

Filter Sock Replacement
Generally, when you have your kitchen hood ducts and fans cleaned, it is a good time to change your Grease Gutter System filters.
Why use Genuine Omni Containment Systems Grease Gutter™ replacement filters?
Simple! All absorbent material is not the same!
• Our absorbent material does not deteriorate due to UV exposure from the sun. We found that after only 30 days of sun exposure, most available absorbent material began to deteriorate. All that was left was the greasy inner material making swap outs and cleanup a nightmare.
• Our special filters absorb fat based grease/oils. Other “absorbents” are designed to contain petroleum based oils, not fat based grease/oils.
• Our filters repel moisture. The key to the incredible capacity of our filters is that they do not use up valuable space by retaining moisture. This allows complete saturation with the culprit, fat based grease/oils.

The Best High-TemperatureDuct Access Doors

G&K Service Company and Ductmate Industries, The Industry’s leader in Access Doors, is proud to bring you the best high-temperature duct access door on the market. For a simple solutions to your complicated task try Ductmate’s pre-assembled high temperature access doors.

Available in both 1000¾ and 2300¾ models, Ductmate has designed these doors to exceed all existing criteria for high temperature access doors. Ductmate’s exceptional 2300¾ door has been designed to meet all the standards set forth in NFPA 96.

• For grease duct and hitemperature applications
• 16 gauge black iron backing place
• smooth interior finish
• No measure (self-sticking template provided)
• Effortless opening & closing(no tool required)
• No frame to install & seal
• Available in many sizes of standard flat & round duct access doors
• High temperature fiberglass or ceramic gasket meets NFPA 96 standard
• Bolts are welded to the inner door panel